Multi-station cold heading machine in Europe and the United States and Japan and other developed countries has developed rapidly, the use of generic growing around at present, the main producing countries of the United States, Japan and Germany Italy Britain industrial developed countries multi-station cold heading machine is characterized by large weight of the heavier upsetting forging force ...
1. When the motor is overloaded or other abnormal conditions, the frequency conversion protection function will act to ensure the safety of the equipment.
2. It can be used in conjunction with PLC to realize fully automated processing.
3. Due to the use of frequency conversion speed regulation, the speed adjustment can be realized steplessly according to the process requirements of the workpi...
1 - processing bar or plate material must be clean, head burr to wear off, are not allowed to make a flat
2 - often pay attention to the disk material frame work, found that the turmoil should immediately stop plate material processing to finished quickly, is expected to end should be from the dish rack out
3 - to start the device, only in the case of disconnection feeding device, is allowed ...
The modern automatic cold heading machine has been increased from the simple two-station in the past to the multi-station. At present, the newer domestic varieties include 5-mode, 6-mode and 6-mode extended automatic cold heading machine.
Using the plasticity of metal, cold state mechanics is used to apply pressure or cold drawing to achieve the purpose of solid state deformation of metal. A f...
1. The connection between the crankshaft and the body and the impact connecting rod is made of high wear-resistant alloy copper pads, which have large bearing capacity, long service life and low maintenance cost.
2. The body of the cold heading machine is cast by alloyed ductile iron 500, with high tensile strength and good wear resistance.
3. Adopt two-stage gear transmission system, high tr...
Cold heading machine mainly USES to add alloy cast balls, therefore, has the very high tensile strength, but also has good wear resistance, also adopted a secondary gear transmission system, the use of mechanical equipment better provides favorable conditions and action, not as good as high transmission efficiency and for the transmission torque is also very big, with cooperate with pneumatic c...